 |
Double coupler № 4700.019, 4700.022. For right-angle connection of tubes, working load 9.1 kN. |
 |
Swivel coupler № 4702.019, 4702.022; for any angled connection, work load 5.2 kN. |
 |
Half-coupler with eye bolt № 4707.019, 4707.022; for connecting general elements. |
 |
Wedge double coupler № 4727.000; for secondary right-angled connections. |
 |
Wedge swivel coupler № 4728.000; for secondary angled connections. |
 |
Wedge half coupler № 4729.000; connection of non-system parts. |
 |
Wedge spindle swivel coupler № 4735.000; connection of scaffolding tube to threaded spindle at any required angle. |
 |
Reducing double coupler 48.3/33.7 № 4737.019, 4737.022; right-angled connection of tube of Ø 48.3 mm to tube of Ø 33.7 mm. |
 |
Reduction swivel coupler 48.3 x 33.7 mm № 4738.019, 4738.022; connects a tube of Ø 48,3 mm to a tube of Ø 33,7 mm. |
 |
Reducing double coupler 60.3/48.3 № 4744.022; right-angled connection of tube of Ø 48.3 mm to tube of Ø 60.3 mm |
 |
Reduction swivel coupler, 60.3 x 48.3 mm № 4745.022; angled connection of tube of Ø 48.3 mm to tube of Ø 60,3 mm. |
 |
Parallel coupler № 0700.173, 0704.563; 19 or 22 mm. |
 |
Half-coupler with toe board pin № 4708.019, 4708.022; for toe board connection in special structures. |
 |
Guardrail couplerwith guardrail box № 1735.000; For connection of guardrails on the inside of a SpeedyScaf scaffold. |
 |
Joint coupler №№ 4703.019, 4703.022; for end-to-end connection of two tubes. |
 |
Spring bolt № 4739.000; for end-to-end connection of two tubes in conjunction with end-to-end coupler 4703.022. |
 |
Squared timber coupler, large № 4717.019, 4717.022; with steel bracket for holding wood sections (e.g. 10х12). |
 |
Squared timber coupler, small № 4718.019, 4718.022; seel bracket for holdingwood sections 8 x 8 cm. |
 |
Wedge-head coupler, rigid № 2628.019, 2628.022; connection of tubes to rosette of Allround standards at right angles. |
 |
Wedge head swivel coupler № 2629.019, 2629.022; connection of tubes to rosette of Allround standards at any angle. |
 |
Twin wedge coupler № 2628.000; connection of Allround standards with one another; working load 3 kN. |
 |
Suspended scaffolding coupler № 4715.019, 4715.022; hung vertically, U-shaped or double, T-shaped profile, working load 15 kN. |
 |
Suspended scaffolding coupler №№ 4713.019, 4713.022; Hung vertically, U-shaped or double, T-shaped profile, working load 15 kN. |
 |
Safety hook for suspended scaffolding coupler № 4714.000; two of these hooks are used for securing No. 4713.022 to flanges of max. width 220 mm |
 |
Lattice girder coupler № 4720.019, 4720.022; connection of bottom chord of system lattice girders to scaffolding standards. |
 |
Lattice girder coupler, long № 0708.228; connection of bottom chord of non-system lattice girders to scaffolding standards. |
 |
Clamp coupler № 4716.019, 4716.022; clamp fixing of scaffold tube to flanges of I beams. Permissible loading 9.0 kN vertical or parallel to tube axis. |
 |
Combination coupler № 4711.019, 4711.022; connection of scaffolding tubes to wooden parts. |
 |
Anchor coupler for brackets № 4734.019, 4734.022; connection of scaffolding anchors to brackets. |
 |
|
 |
Crane Eyelet with 2 half-couplers № 0701.791; for transporting roofs, etc., max. load 18 kN. |
 |
Crane eyelet with 3 half couplers № 0700.293; offsetting of roofs permissible loading 14.1 kN vertical and parallel to tube axis. |
 |
Half-coupler with loop № 0712.426, 0712.431; used in conjunction with a pulley; load 50 kg. |
 |
Half-coupler with hook № 0702.095; allows creating long anchor with tubes. |
 |
Plate holder, long № 0701.558; connection of wall panels max. 13 mm thick, in Allround scaffolding. |
 |
Plate holder, short № 0701.554; for wall plates used together with Allround scaffolding, maximum width 13 mm. |
 |
Half-coupler with plate № 0701.721; For connecting wall plates with tubes. |
 |
Spigot with half coupler for extension on Ø 48.30 mm №№ 4706.019, 4706.022; for connection of Allround standards to lattice girders. |
 |
Ratchet spanner with reinforced head №№ 4740.019, 4740.022; 19 or 22 mm. |
 |
Scaffolding ratchet №№ 4726.019, 4726.02; 9 or 22 mm. |
Catalogues to download:
1/ Layher Аксесуары_2018.pdf (5,18 Mb)